 |
 |
 |
|
Supreme
• Super High Gloss Floor Finish
• Low Maintenance
• Extremely Durable
• High Speed Burnishable
• High Solids
Supreme is a high gloss floor finish that delivers a long lasting wet looking floor
with fewer coats than traditional floor finishes. Supreme is extremely scuff, scratch
and black mark resistant. Expect floors finished with Supreme to last up to three
times longer than conventional floor finishes. High speed buffing will restore Supreme
to a wet look finish,
Supreme is recommended for use in areas of non-resilient flooring such as hospitals,
nursing homes, schools, day care centers, grocery stores, retail centers,
malls, and warehouses.
To use Supreme strip away old floor finish (best results using Newline Industries
Express Floor Stripper) and thoroughly rinse floor with clean water. Allow floor to
dry. Apply Supreme in a thin, even coat using a clean mop or applicator. Apply Supreme
at a coverage rate of 2000 to 3000 feet per gallon. Allow floor to dry a minimum
of 30 minutes before recoating. Temperature and humidity will dictate drying
time. Apply a minimum of three coats for maximum durability. More coats may be
needed but never apply more than five coats of Supreme in one service visit.
To maintain finished look, dust mop or sweep floors daily with untreated mops
to remove dirt and sand. Damp mop floors daily with Newline Industries Neutral
Cleaner to keep a clean, glossy, streak-free finish. Only mop floors finished with
Supreme with a neutral pH cleaner. For best results when burnishing, pre-clean
floor with Newline Industries Restorer beforehand.
|
|
|
 |
|
 |
|
|
|
Security
