GE Protimeter MMS Plus Moisture Meter

The moisture you cannot see matters most when cleaning and restoring a property after water damage from storms, floods, or fires. From hidden mold to unseen structural damage, undetected moisture damages health and property, and its oversight can create liability. That's why the right moisture meter makes the difference.

The GE Protimeter MMS Plus moisture meter is a complete moisture measurement system in one easy-to-use robust instrument.

Features of the GE Protimeter MMS Plus Moisture Meter

• Hygrometer mode measures relative humidity, ambient temperature, dew point and grains per pound with either a replaceable Hygrostick™ or QuickStick™ probe
• Pin measure mode determines moisture content of wood and Wood Moisture Equivalent (WME) in other building materials
• Pinless measure mode uses radio frequency to detect moisture non-invasively
• Diagnose the extent of moisture intrusion for damage assessment and monitor drying out of building structures
• Use deep wall pin-type probes to measure moisture in walls, wall cavity insulation, sub and surface structures

Use your GE Protimeter MMS Plus moisture meter to search behind ceramic tiles, fine finishes, water stains, tile and vinyl floor coverings, wood, drywall, plaster, masonry, concrete, and concrete blocks. Hygrometry checks the dehumidification process and monitors buildings for adequate ventilation affecting indoor air quality.

• Non-invasive pinless radio frequency finds moisture up to 3/4 in (19 mm) below surface
• Search mode not adversely affected by surface moisture

Addition Applications of the GE Protimeter MMS Plus Moisture Meter

• Measures moisture in concrete floors using ASTM F2170-02
• Measures relative humidity and temperature, dew point and surface temperature, surface proximity to dew point (condensation) and grains per pound
• Use to detect conditions for mold and fungus growth, that can lead to unhealthy living conditions

BLD5800HS - GE Protimeter MMS Plus moisture meter kit with QuickStick/Software Package includes:

• Data download software with cable (BLD5810)
• QuickStick (POL8750) Range 0-100%, fast responding)
• Surface temperature sensor (BLD5804)
• 5" (127 mm) insulated deep wall probes (BLD5018)
• Pin moisture probe and QuickStick lead (BLD5060)
• Calibration check device (BLD5086)
• HygroStick/QuickStick ext. lead, 30" long ( 76 cm) (BLD5802)
• Instructions and nylon zipper pouch
• Wood species calibration table
• One year parts and labor warranty

• Moisture Measurement
• Range Pin (% WME) 8% to 99, readings over 30% are relative
• Non-invasive (RF) up to 3/4 in (19 mm) deep
• 60 to 1000 (relative)
• Surface Temperature
• Probe Range 15°F to 120°F (-10°C to 50°C)
• Hygrostick Data
• (Nominal)  30% to 40% RH (±3% RH) at 68°F (20°C)
• 41% to 98% RH (±2%) at 68°F (20°C)
• Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C)
• Quickstick Data
• (Nominal) 0% to 10% RH, ±3% RH at 68°F (20°C)
• 10% to 90% RH, ±2% RH at 68°F (20°C)
• 90% to 100% RH, ±3% RH at 68°F (20°C)
• Range 32°F to 122°F (0°C to 50°C) ±0.6°F (±0.3°C)
• Nominal response 30% to 90% and back to 30% RH in 45 seconds @ 68°F (20°C)
• Quicksticks for meters made with firmware version 3.15 or higher.
• Data Storage Store up to 1,000 results with date and time stamp from all instrument functions
• Display LCD
• Gross Weight 10.58 oz (300 g) instrument only. 2.5 lb (1.1 kg) complete kit
• Dimensions (LxWxH) 7 in x 2.75 in x 1.9 in (180 mm x 70 mm x 49 mm)
• Maximum Needle Depth 0.4 in (10 mm)
• Batteries (Included) 2 AA